A New Use for the Satellite Dish Step Use a Phillips screwdriver to remove the screws that secure the LNB unit (the antenna part) to the extension arm of the satellite dish, and remove the LNB unit from the extension arm. There is no need to disconnect any coaxial cable, as the Wi-Fi antenna uses USB cable instead. Wifi Satellite InternetPara ordnance serial number look up. Step Replace the LNB unit with a wireless USB Wi-Fi adapter, and secure the adapter with nylon cable ties to the end of the extension arm of the dish assembly. Step Plug a USB cable onto the USB end of the Wi-Fi adapter, and connect the other end of the USB cable to a computer (if Wi-Fi enabled), or modem or router (if not Wi-Fi enabled). Use any available USB port on a laptop computer. Depending upon the length of cable to the computer or router from the satellite dish, a USB cable extension can be used with no loss of signal strength. Step Position the dish at the proper point outside. Your signal strength boost with the dish as the reflective surface should exceed 15dB, which is five times stronger than a USB Wi-Fi adapter alone.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |